[C64]
Directory="$$" ### Define search path to locate system files
JAMAction=0 ### Set action on CPU JAM: (0: Ask, 1: continue, 2: Monitor, 3: Reset, 4: Hard Reset, 5: Quit Emulator)
Speed=100 ### Limit emulation speed to specified value
KeymapUserSymFile="sdl_sym.vkm" ### Specify name of symbolic keymap file
KeymapUserPosFile="sdl_pos.vkm" ### Specify name of positional keymap file
KeyboardType=0 ### Specify emulated keyboard type
KeyboardMapping=0 ### Specify host keyboard layout
ChargenName="chargen" ### Specify name of character generator ROM image
KernalName="kernal" ### Specify name of Kernal ROM image
BasicName="basic" ### Specify name of BASIC ROM image
BoardType=0 ### No description
IECReset=0 ### Computer reset goes to IEC bus (0 = No, 1 = Yes)
CIA1Model=1 ### Set CIA 1 model (0 = old 6526, 1 = new 8521)
CIA2Model=1 ### Set CIA 2 model (0 = old 6526, 1 = new 8521)
KernalRev=3 ### No description
SidTripleAddressStart=57088 ### Specify base address for 3rd SID. (0xD420/0xD440/0xD460/0xD480/0xD4A0/0xD4C0/0xD4E0/0xD500/0xD520/0xD540/0xD560/0xD580/0xD5A0/0xD5C0/0xD5E0/0xD600/0xD620/0xD640/0xD660/0xD680/0xD6A0/0xD6C0/0xD6E0/0xD700/0xD720/0xD740/0xD760/0xD780/0xD7A0/0xD7C0/0xD7E0/0xDE00/0xDE20/0xDE40/0xDE60/0xDE80/0xDEA0/0xDEC0/0xDEE0/0xDF00/0xDF20/0xDF40/0xDF60/0xDF80/0xDFA0/0xDFC0/0xDFE0)
SidQuadAddressStart=57216 ### Specify base address for 4th SID. (0xD420/0xD440/0xD460/0xD480/0xD4A0/0xD4C0/0xD4E0/0xD500/0xD520/0xD540/0xD560/0xD580/0xD5A0/0xD5C0/0xD5E0/0xD600/0xD620/0xD640/0xD660/0xD680/0xD6A0/0xD6C0/0xD6E0/0xD700/0xD720/0xD740/0xD760/0xD780/0xD7A0/0xD7C0/0xD7E0/0xDE00/0xDE20/0xDE40/0xDE60/0xDE80/0xDEA0/0xDEC0/0xDEE0/0xDF00/0xDF20/0xDF40/0xDF60/0xDF80/0xDFA0/0xDFC0/0xDFE0)
BurstMod=0 ### Burst modification (0 = None, 1 = CIA1, 2 = CIA2)
MemoryHack=0 ### Set the 'memory expansion hack' device (0: None, 1: C64 256K, 2: +60K, 3: +256K)
PLUS60Kfilename="" ### Specify name of PLUS60K image
PLUS60Kbase=53504 ### Base address of the PLUS60K expansion. (0xD040/0xD100)
PLUS256Kfilename="" ### Specify name of PLUS256K image
C64_256Kfilename="" ### Specify name of 256K image
C64_256Kbase=57216 ### Base address of the 256K expansion. (0xDE00/0xDE80/0xDF00/0xDF80)
VICIICheckSsColl=1 ### Enable sprite-sprite collision registers
VICIICheckSbColl=1 ### Enable sprite-background collision registers
SidFilters=1 ### Emulate SID filters
RsUserEnable=0 ### Enable RS232 userport emulation
RsUserBaud=300 ### Set the baud rate of the RS232 userport emulation.
RsUserDev=0 ### Specify VICE RS232 device for userport
IECDevice4=0 ### Enable IEC device emulation for device #4
IECDevice5=0 ### Enable IEC device emulation for device #5
IECDevice6=0 ### Enable IEC device emulation for device #6
IECDevice7=0 ### Enable IEC device emulation for device #7
IECDevice8=0 ### Enable IEC device emulation for device #8
IECDevice9=0 ### Enable IEC device emulation for device #9
IECDevice10=0 ### Enable IEC device emulation for device #10
IECDevice11=0 ### Enable IEC device emulation for device #11
PrinterTextDevice1="vice_printer.txt" ### Specify name of printer text device or dump file
PrinterUserportTextDevice=0 ### Specify printer text output device for userport printer
Printer4TextDevice=0 ### Specify printer text output device for printer #4
Printer5TextDevice=0 ### Specify printer text output device for printer #5
Printer6TextDevice=0 ### Specify printer text output device for printer #6
Printer4Output="text" ### Specify name of output device for device #4. (graphics, text)
Printer5Output="text" ### Specify name of output device for device #5. (graphics, text)
Printer6Output="text" ### Specify name of output device for device #6. (graphics, text)
Printer4Driver="ascii" ### Specify name of printer driver for device #4. (ascii/mps803/nl10/raw)
Printer5Driver="ascii" ### Specify name of printer driver for device #5. (ascii/mps803/nl10/raw)
Printer6Driver="1520" ### Specify name of printer driver for device #6. (1520/raw)
Printer4=0 ### Set device type for device #4 (0: None, 1: Filesystem, 2: Real)
Printer5=0 ### Set device type for device #5 (0: None, 1: Filesystem, 2: Real)
Printer6=0 ### Set device type for device #6 (0: None, 1: Filesystem, 2: Real)
Printer7=0 ### Set device type for device #7 (0: None, 2: Real)
PrinterUserport=0 ### Enable the userport printer emulation
PrinterUserportDriver="ascii" ### Specify name of printer driver for the userport printer. (ascii/nl10/raw)
PrinterUserportOutput="text" ### Specify name of output device for the userport printer. (graphics, text)
JoyPort4Device=1 ### No description
JoyPort3Device=1 ### No description
JoyPort2Device=1 ### No description
JoyPort1Device=1 ### No description
BBRTCSave=0 ### Enable saving of the BBRTC data when changed.
JoyOpposite=0 ### Enable opposite joystick directions
JoyDevice1=0 ### No description
JoyDevice2=0 ### No description
JoyDevice3=0 ### No description
JoyDevice4=0 ### No description
UserportCollisionHandling=0 ### Select the way the Userport collisions should be handled, (0: error message and detach all involved devices, 1: error message and detach last attached involved device, 2: warning in log and 'AND' the valid return values
SampleName="" ### Specify name of sample file
SamplerDevice=0 ### Specify sampler device. (0: media file input)
SamplerGain=100 ### Specify sampler gain in percent (1%-200%)
FliplistName="/userdata/bios//vice/fliplist-C64.vfl" ### Specify name of the flip list file image
AttachDevice9Readonly=0 ### Attach disk image for drive #9 read only
AttachDevice10Readonly=0 ### Attach disk image for drive #10 read only
AttachDevice11Readonly=0 ### Attach disk image for drive #11 read only
FileSystemDevice8=1 ### Set device type for device #8 (0: None, 1: Filesystem, 2: OpenCBM, 3: Block device)
FileSystemDevice9=0 ### Set device type for device #9 (0: None, 1: Filesystem, 2: OpenCBM, 3: Block device)
FileSystemDevice10=0 ### Set device type for device #10 (0: None, 1: Filesystem, 2: OpenCBM, 3: Block device)
FileSystemDevice11=0 ### Set device type for device #11 (0: None, 1: Filesystem, 2: OpenCBM, 3: Block device)
FSDevice8Dir="." ### No description
FSDevice9Dir="." ### No description
FSDevice10Dir="." ### No description
FSDevice11Dir="." ### No description
FSDevice8ConvertP00=1 ### Enable on-read support for P00 files on drive 8
FSDevice9ConvertP00=1 ### Enable on-read support for P00 files on drive 9
FSDevice10ConvertP00=1 ### Enable on-read support for P00 files on drive 10
FSDevice11ConvertP00=1 ### Enable on-read support for P00 files on drive 11
FSDevice8SaveP00=0 ### Enable saving of P00 files on drive 8
FSDevice9SaveP00=0 ### Enable saving of P00 files on drive 9
FSDevice10SaveP00=0 ### Enable saving of P00 files on drive 10
FSDevice11SaveP00=0 ### Enable saving of P00 files on drive 11
FSDevice8HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 8
FSDevice9HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 9
FSDevice10HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 10
FSDevice11HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 11
KbdbufDelay=0 ### Set additional keyboard buffer delay (0: use default)
AutostartPrgDiskImage="/userdata/bios//vice/autostart-C64.d64" ### Set disk image for autostart of PRG files
AutostartBasicLoad=0 ### On autostart, load to BASIC start (without ',1')
AutostartRunWithColon=0 ### On autostart, use the 'RUN' command with a colon, i.e., 'RUN:'
AutostartHandleTrueDriveEmulation=0 ### Handle True Drive Emulation on autostart
AutostartDelay=0 ### Set initial autostart delay (0: use default)
SmartMouseRTCSave=0 ### Enable saving of smart mouse RTC data when changed.
Drive8RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive8ExtendImagePolicy=0 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive8IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive8RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive8Wobble=50 ### Set drive wobble (100 = +/-0.5rpm)
Drive9RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive9ExtendImagePolicy=0 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive9IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive9RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive9Wobble=50 ### Set drive wobble (100 = +/-0.5rpm)
Drive10RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive10ExtendImagePolicy=0 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive10IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive10RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive10Wobble=50 ### Set drive wobble (100 = +/-0.5rpm)
Drive11RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive11ExtendImagePolicy=0 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive11IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive11RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive11Wobble=50 ### Set drive wobble (100 = +/-0.5rpm)
Drive9Type=0 ### Set drive type (0: no drive, 1540: CBM 1540, 1541: CBM 1541, 1542: CBM 1541-II, 1570: CBM 1570, 1571: CBM 1571, 1581: CBM 1581, 2000: CMD FD-2000, 4000: CMD FD-4000, 2031: CBM 2031, 2040: CBM 2040, 3040: CBM 3040, 4040: CBM 4040, 1001: CBM 1001, 8050: CBM 8050, 8250: CBM 8250)
Drive10Type=0 ### Set drive type (0: no drive, 1540: CBM 1540, 1541: CBM 1541, 1542: CBM 1541-II, 1570: CBM 1570, 1571: CBM 1571, 1581: CBM 1581, 2000: CMD FD-2000, 4000: CMD FD-4000, 2031: CBM 2031, 2040: CBM 2040, 3040: CBM 3040, 4040: CBM 4040, 1001: CBM 1001, 8050: CBM 8050, 8250: CBM 8250)
Drive11Type=0 ### Set drive type (0: no drive, 1540: CBM 1540, 1541: CBM 1541, 1542: CBM 1541-II, 1570: CBM 1570, 1571: CBM 1571, 1581: CBM 1581, 2000: CMD FD-2000, 4000: CMD FD-4000, 2031: CBM 2031, 2040: CBM 2040, 3040: CBM 3040, 4040: CBM 4040, 1001: CBM 1001, 8050: CBM 8050, 8250: CBM 8250)
Drive8RAM2000=0 ### Enable 8KB RAM expansion at $2000-$3FFF
Drive8RAM4000=0 ### Enable 8KB RAM expansion at $4000-$5FFF
Drive8RAM6000=0 ### Enable 8KB RAM expansion at $6000-$7FFF
Drive8RAM8000=0 ### Enable 8KB RAM expansion at $8000-$9FFF
Drive8RAMA000=0 ### Enable 8KB RAM expansion at $A000-$BFFF
Drive9RAM2000=0 ### Enable 8KB RAM expansion at $2000-$3FFF
Drive9RAM4000=0 ### Enable 8KB RAM expansion at $4000-$5FFF
Drive9RAM6000=0 ### Enable 8KB RAM expansion at $6000-$7FFF
Drive9RAM8000=0 ### Enable 8KB RAM expansion at $8000-$9FFF
Drive9RAMA000=0 ### Enable 8KB RAM expansion at $A000-$BFFF
Drive10RAM2000=0 ### Enable 8KB RAM expansion at $2000-$3FFF
Drive10RAM4000=0 ### Enable 8KB RAM expansion at $4000-$5FFF
Drive10RAM6000=0 ### Enable 8KB RAM expansion at $6000-$7FFF
Drive10RAM8000=0 ### Enable 8KB RAM expansion at $8000-$9FFF
Drive10RAMA000=0 ### Enable 8KB RAM expansion at $A000-$BFFF
Drive11RAM2000=0 ### Enable 8KB RAM expansion at $2000-$3FFF
Drive11RAM4000=0 ### Enable 8KB RAM expansion at $4000-$5FFF
Drive11RAM6000=0 ### Enable 8KB RAM expansion at $6000-$7FFF
Drive11RAM8000=0 ### Enable 8KB RAM expansion at $8000-$9FFF
Drive11RAMA000=0 ### Enable 8KB RAM expansion at $A000-$BFFF
DosName1540="dos1540" ### Specify name of 1540 DOS ROM image
DosName1541="dos1541" ### Specify name of 1541 DOS ROM image
DosName1541ii="d1541II" ### No description
DosName1570="dos1570" ### Specify name of 1570 DOS ROM image
DosName1571="dos1571" ### Specify name of 1571 DOS ROM image
DosName1581="dos1581" ### Specify name of 1581 DOS ROM image
DosName2000="dos2000" ### Specify name of 2000 DOS ROM image
DosName4000="dos4000" ### Specify name of 4000 DOS ROM image
Drive8ParallelCable=0 ### Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
Drive8ProfDOS=0 ### Enable Professional DOS
Drive8SuperCard=0 ### Enable SuperCard+
Drive8StarDos=0 ### Enable StarDOS
Drive9ParallelCable=0 ### Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
Drive9ProfDOS=0 ### Enable Professional DOS
Drive9SuperCard=0 ### Enable SuperCard+
Drive9StarDos=0 ### Enable StarDOS
Drive10ParallelCable=0 ### Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
Drive10ProfDOS=0 ### Enable Professional DOS
Drive10SuperCard=0 ### Enable SuperCard+
Drive10StarDos=0 ### Enable StarDOS
Drive11ParallelCable=0 ### Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
Drive11ProfDOS=0 ### Enable Professional DOS
Drive11SuperCard=0 ### Enable SuperCard+
Drive11StarDos=0 ### Enable StarDOS
DriveProfDOS1571Name="" ### Specify name of Professional DOS 1571 ROM image
DriveSuperCardName="" ### Specify name of SuperCard+ ROM image
DriveStarDosName="" ### Specify name of StarDOS ROM image
DosName2031="dos2031" ### Specify name of 2031 DOS ROM image
DosName2040="dos2040" ### Specify name of 2040 DOS ROM image
DosName3040="dos3040" ### Specify name of 3040 DOS ROM image
DosName4040="dos4040" ### Specify name of 4040 DOS ROM image
DosName1001="dos1001" ### Specify name of 1001/8050/8250 DOS ROM image
Datasette=1 ### No description
DatasetteResetWithCPU=1 ### No description
DatasetteZeroGapDelay=20000 ### No description
DatasetteSpeedTuning=0 ### No description
DatasetteTapeWobble=10 ### No description
TapeLogfilename="" ### Specify tape log file name
TapeLog=0 ### Enable the tape log device
TapeLogDestination=0 ### Enable logging to a file
CPClockF83=0 ### Enable CP Clock F83 (PCF8583 RTC)
CPClockF83Save=0 ### Enable saving of the CP Clock F83 (PCF8583 RTC) data when changed.
TapeSenseDongle=0 ### Enable tape sense dongle
DTLBasicDongle=0 ### Enable DTL Basic dongle
TapecartEnabled=0 ### Enable tapecart
TapecartUpdateTCRT=1 ### Enable updating tapecart .tcrt image
TapecartOptimizeTCRT=1 ### Enable tapecart .tcrt image optimization on write
TapecartLogLevel=0 ### Set tapecart log verbosity
TapecartTCRTFilename= ### Attach TCRT tapecart image
TapeDiag586220Harness=0 ### No description
GlueLogic=0 ### No description
UserportDAC=0 ### No description
UserportDIGIMAX=0 ### No description
UserportRTC58321a=0 ### No description
UserportRTC58321aSave=0 ### No description
UserportRTCDS1307=0 ### No description
UserportRTCDS1307Save=0 ### No description
Userport4bitSampler=0 ### No description
Userport8BSS=0 ### No description
UserportDiag586220Harness=0 ### No description
IOCollisionHandling=0 ### No description
CartridgeReset=1 ### No description
CartridgeType=-1 ### No description
MMC64BIOSfilename="" ### No description
MMC64imagefilename="" ### No description
MMC64=0 ### No description
MMC64_RO=0 ### No description
MMC64_flashjumper=0 ### No description
MMC64_revision=0 ### No description
MMC64_bios_write=0 ### No description
MMC64_sd_type=0 ### No description
MMC64ClockPort=0 ### No description
MagicVoiceImage="" ### No description
MagicVoiceCartridgeEnabled=0 ### No description
IEEE488Image="" ### No description
IEEE488=0 ### No description
Expertfilename="" ### No description
ExpertCartridgeEnabled=0 ### No description
ExpertCartridgeMode=1 ### No description
ExpertImageWrite=0 ### No description
DQBBfilename="" ### No description
DQBB=0 ### No description
DQBBImageWrite=0 ### No description
Isepicfilename="" ### No description
IsepicCartridgeEnabled=0 ### No description
IsepicSwitch=0 ### No description
IsepicImageWrite=0 ### No description
RAMCARTfilename="" ### No description
RAMCART=0 ### No description
RAMCART_RO=0 ### No description
RAMCARTsize=128 ### No description
RAMCARTImageWrite=0 ### No description
DIGIMAX=0 ### No description
DIGIMAXbase=56832 ### No description
DS12C887RTC=0 ### No description
DS12C887RTCbase=56832 ### No description
DS12C887RTCRunMode=1 ### No description
DS12C887RTCSave=0 ### No description
GEORAMfilename="" ### No description
GEORAM=0 ### No description
GEORAMsize=512 ### No description
GEORAMImageWrite=0 ### No description
REUfilename="" ### No description
REUImageWrite=0 ### No description
SFXSoundSampler=0 ### No description
EasyFlashJumper=0 ### No description
EasyFlashOptimizeCRT=1 ### No description
GMod2EEPROMImage="" ### No description
GMod2FlashWrite=0 ### No description
GMod2EEPROMRW=1 ### No description
IDE64Image1="ide.cfa" ### No description
IDE64Image2="" ### No description
IDE64Image3="" ### No description
IDE64Image4="" ### No description
IDE64Cylinders1=256 ### No description
IDE64Cylinders2=256 ### No description
IDE64Cylinders3=256 ### No description
IDE64Cylinders4=256 ### No description
IDE64Heads1=4 ### No description
IDE64Heads2=4 ### No description
IDE64Heads3=4 ### No description
IDE64Heads4=4 ### No description
IDE64Sectors1=16 ### No description
IDE64Sectors2=16 ### No description
IDE64Sectors3=16 ### No description
IDE64Sectors4=16 ### No description
IDE64AutodetectSize1=1 ### No description
IDE64AutodetectSize2=1 ### No description
IDE64AutodetectSize3=1 ### No description
IDE64AutodetectSize4=1 ### No description
IDE64version=1 ### No description
IDE64RTCSave=0 ### No description
IDE64ClockPort=0 ### No description
SBDIGIMAX=0 ### No description
SBDIGIMAXbase=56896 ### No description
MMCRCardImage="" ### No description
MMCREEPROMImage="" ### No description
MMCRRescueMode=0 ### No description
MMCRImageWrite=0 ### No description
MMCRCardRW=1 ### No description
MMCRSDType=0 ### No description
MMCREEPROMRW=1 ### No description
MMCRClockPort=0 ### No description
RRFlashJumper=0 ### No description
RRBankJumper=0 ### No description
RRBiosWrite=0 ### No description
RRrevision=0 ### No description
RRClockPort=0 ### No description
SSRamExpansion=0 ### No description
CartridgeFile="" ### No description
RAMInitStartValue=0 ### No description
RAMInitValueInvert=64 ### No description
RAMInitPatternInvert=0 ### No description

